// Copyright 2015 The Chromium Authors. All rights reserved. // Use of this source code is governed by a BSD-style license that can be // found in the LICENSE file. #ifndef BASE_TRACE_EVENT_COMMON_TRACE_EVENT_COMMON_H_ #define BASE_TRACE_EVENT_COMMON_TRACE_EVENT_COMMON_H_ // This header file defines the set of trace_event macros without specifying // how the events actually get collected and stored. If you need to expose trace // events to some other universe, you can copy-and-paste this file as well as // trace_event.h, modifying the macros contained there as necessary for the // target platform. The end result is that multiple libraries can funnel events // through to a shared trace event collector. // IMPORTANT: To avoid conflicts, if you need to modify this file for a library, // land your change in base/ first, and then copy-and-paste it. // Trace events are for tracking application performance and resource usage. // Macros are provided to track: // Begin and end of function calls // Counters // // Events are issued against categories. Whereas LOG's // categories are statically defined, TRACE categories are created // implicitly with a string. For example: // TRACE_EVENT_INSTANT0("MY_SUBSYSTEM", "SomeImportantEvent", // TRACE_EVENT_SCOPE_THREAD) // // It is often the case that one trace may belong in multiple categories at the // same time. The first argument to the trace can be a comma-separated list of // categories, forming a category group, like: // // TRACE_EVENT_INSTANT0("input,views", "OnMouseOver", TRACE_EVENT_SCOPE_THREAD) // // We can enable/disable tracing of OnMouseOver by enabling/disabling either // category. // // Events can be INSTANT, or can be pairs of BEGIN and END in the same scope: // TRACE_EVENT_BEGIN0("MY_SUBSYSTEM", "SomethingCostly") // doSomethingCostly() // TRACE_EVENT_END0("MY_SUBSYSTEM", "SomethingCostly") // Note: our tools can't always determine the correct BEGIN/END pairs unless // these are used in the same scope. Use ASYNC_BEGIN/ASYNC_END macros if you // need them to be in separate scopes. // // A common use case is to trace entire function scopes. This // issues a trace BEGIN and END automatically: // void doSomethingCostly() { // TRACE_EVENT0("MY_SUBSYSTEM", "doSomethingCostly"); // ... // } // // Additional parameters can be associated with an event: // void doSomethingCostly2(int howMuch) { // TRACE_EVENT1("MY_SUBSYSTEM", "doSomethingCostly", // "howMuch", howMuch); // ... // } // // The trace system will automatically add to this information the // current process id, thread id, and a timestamp in microseconds. // // To trace an asynchronous procedure such as an IPC send/receive, use // NESTABLE_ASYNC_BEGIN and NESTABLE_ASYNC_END: // [single threaded sender code] // static int send_count = 0; // ++send_count; // TRACE_EVENT_NESTABLE_ASYNC_BEGIN0( // "ipc", "message", TRACE_ID_LOCAL(send_count)); // Send(new MyMessage(send_count)); // [receive code] // void OnMyMessage(send_count) { // TRACE_NESTABLE_EVENT_ASYNC_END0( // "ipc", "message", TRACE_ID_LOCAL(send_count)); // } // The third parameter is a unique ID to match NESTABLE_ASYNC_BEGIN/ASYNC_END // pairs. NESTABLE_ASYNC_BEGIN and ASYNC_END can occur on any thread of any // traced process. // Pointers can be used for the ID parameter, and they will // be annotated internally so that the same pointer on two different processes // will not match. For example: // class MyTracedClass { // public: // MyTracedClass() { // TRACE_EVENT_NESTABLE_ASYNC_BEGIN0("category", "MyTracedClass", this); // } // ~MyTracedClass() { // TRACE_EVENT_NESTABLE_ASYNC_END0("category", "MyTracedClass", this); // } // } // // Trace event also supports counters, which is a way to track a quantity // as it varies over time. Counters are created with the following macro: // TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter", g_myCounterValue); // // Counters are process-specific. The macro itself can be issued from any // thread, however. // // Sometimes, you want to track two counters at once. You can do this with two // counter macros: // TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter0", g_myCounterValue[0]); // TRACE_COUNTER1("MY_SUBSYSTEM", "myCounter1", g_myCounterValue[1]); // Or you can do it with a combined macro: // TRACE_COUNTER2("MY_SUBSYSTEM", "myCounter", // "bytesPinned", g_myCounterValue[0], // "bytesAllocated", g_myCounterValue[1]); // This indicates to the tracing UI that these counters should be displayed // in a single graph, as a summed area chart. // // Since counters are in a global namespace, you may want to disambiguate with a // unique ID, by using the TRACE_COUNTER_ID* variations. // // By default, trace collection is compiled in, but turned off at runtime. // Collecting trace data is the responsibility of the embedding // application. In Chrome's case, navigating to about:tracing will turn on // tracing and display data collected across all active processes. // // // Memory scoping note: // Tracing copies the pointers, not the string content, of the strings passed // in for category_group, name, and arg_names. Thus, the following code will // cause problems: // char* str = strdup("importantName"); // TRACE_EVENT_INSTANT0("SUBSYSTEM", str); // BAD! // free(str); // Trace system now has dangling pointer // // To avoid this issue with the |name| and |arg_name| parameters, use the // TRACE_EVENT_COPY_XXX overloads of the macros at additional runtime overhead. // Notes: The category must always be in a long-lived char* (i.e. static const). // The |arg_values|, when used, are always deep copied with the _COPY // macros. // // When are string argument values copied: // const char* arg_values are only referenced by default: // TRACE_EVENT1("category", "name", // "arg1", "literal string is only referenced"); // Use TRACE_STR_COPY to force copying of a const char*: // TRACE_EVENT1("category", "name", // "arg1", TRACE_STR_COPY("string will be copied")); // std::string arg_values are always copied: // TRACE_EVENT1("category", "name", // "arg1", std::string("string will be copied")); // // // Convertable notes: // Converting a large data type to a string can be costly. To help with this, // the trace framework provides an interface ConvertableToTraceFormat. If you // inherit from it and implement the AppendAsTraceFormat method the trace // framework will call back to your object to convert a trace output time. This // means, if the category for the event is disabled, the conversion will not // happen. // // class MyData : public base::trace_event::ConvertableToTraceFormat { // public: // MyData() {} // void AppendAsTraceFormat(std::string* out) const override { // out->append("{\"foo\":1}"); // } // private: // ~MyData() override {} // DISALLOW_COPY_AND_ASSIGN(MyData); // }; // // TRACE_EVENT1("foo", "bar", "data", // std::unique_ptr(new MyData())); // // The trace framework will take ownership if the passed pointer and it will // be free'd when the trace buffer is flushed. // // Note, we only do the conversion when the buffer is flushed, so the provided // data object should not be modified after it's passed to the trace framework. // // // Thread Safety: // A thread safe singleton and mutex are used for thread safety. Category // enabled flags are used to limit the performance impact when the system // is not enabled. // // TRACE_EVENT macros first cache a pointer to a category. The categories are // statically allocated and safe at all times, even after exit. Fetching a // category is protected by the TraceLog::lock_. Multiple threads initializing // the static variable is safe, as they will be serialized by the lock and // multiple calls will return the same pointer to the category. // // Then the category_group_enabled flag is checked. This is a unsigned char, and // not intended to be multithread safe. It optimizes access to AddTraceEvent // which is threadsafe internally via TraceLog::lock_. The enabled flag may // cause some threads to incorrectly call or skip calling AddTraceEvent near // the time of the system being enabled or disabled. This is acceptable as // we tolerate some data loss while the system is being enabled/disabled and // because AddTraceEvent is threadsafe internally and checks the enabled state // again under lock. // // Without the use of these static category pointers and enabled flags all // trace points would carry a significant performance cost of acquiring a lock // and resolving the category. // Check that nobody includes this file directly. Clients are supposed to // include the surrounding "trace_event.h" of their project instead. #if defined(TRACE_EVENT0) #error "Another copy of this file has already been included." #endif // This will mark the trace event as disabled by default. The user will need // to explicitly enable the event. #define TRACE_DISABLED_BY_DEFAULT(name) "disabled-by-default-" name // Records a pair of begin and end events called "name" for the current // scope, with 0, 1 or 2 associated arguments. If the category is not // enabled, then this does nothing. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. #define TRACE_EVENT0(category_group, name) \ INTERNAL_TRACE_EVENT_ADD_SCOPED(category_group, name) #define TRACE_EVENT_WITH_FLOW0(category_group, name, bind_id, flow_flags) \ INTERNAL_TRACE_EVENT_ADD_SCOPED_WITH_FLOW(category_group, name, bind_id, \ flow_flags) #define TRACE_EVENT1(category_group, name, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_SCOPED(category_group, name, arg1_name, arg1_val) #define TRACE_EVENT_WITH_FLOW1(category_group, name, bind_id, flow_flags, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_SCOPED_WITH_FLOW(category_group, name, bind_id, \ flow_flags, arg1_name, arg1_val) #define TRACE_EVENT2(category_group, name, arg1_name, arg1_val, arg2_name, \ arg2_val) \ INTERNAL_TRACE_EVENT_ADD_SCOPED(category_group, name, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_WITH_FLOW2(category_group, name, bind_id, flow_flags, \ arg1_name, arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_SCOPED_WITH_FLOW(category_group, name, bind_id, \ flow_flags, arg1_name, arg1_val, \ arg2_name, arg2_val) // Records a single event called "name" immediately, with 0, 1 or 2 // associated arguments. If the category is not enabled, then this // does nothing. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. #define TRACE_EVENT_INSTANT0(category_group, name, scope) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ TRACE_EVENT_FLAG_NONE | scope) #define TRACE_EVENT_INSTANT1(category_group, name, scope, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ TRACE_EVENT_FLAG_NONE | scope, arg1_name, arg1_val) #define TRACE_EVENT_INSTANT2(category_group, name, scope, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ TRACE_EVENT_FLAG_NONE | scope, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_COPY_INSTANT0(category_group, name, scope) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ TRACE_EVENT_FLAG_COPY | scope) #define TRACE_EVENT_COPY_INSTANT1(category_group, name, scope, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ TRACE_EVENT_FLAG_COPY | scope, arg1_name, arg1_val) #define TRACE_EVENT_COPY_INSTANT2(category_group, name, scope, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ TRACE_EVENT_FLAG_COPY | scope, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_INSTANT_WITH_FLAGS0(category_group, name, scope_and_flags) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ scope_and_flags) #define TRACE_EVENT_INSTANT_WITH_FLAGS1(category_group, name, scope_and_flags, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_INSTANT, category_group, name, \ scope_and_flags, arg1_name, arg1_val) #define TRACE_EVENT_INSTANT_WITH_TIMESTAMP0(category_group, name, scope, \ timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_INSTANT, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE | scope) #define TRACE_EVENT_INSTANT_WITH_TIMESTAMP1(category_group, name, scope, \ timestamp, arg_name, arg_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_INSTANT, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE | scope, arg_name, arg_val) // Records a single BEGIN event called "name" immediately, with 0, 1 or 2 // associated arguments. If the category is not enabled, then this // does nothing. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. #define TRACE_EVENT_BEGIN0(category_group, name) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, category_group, name, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_BEGIN1(category_group, name, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, category_group, name, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_BEGIN2(category_group, name, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, category_group, name, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_BEGIN_WITH_FLAGS0(category_group, name, flags) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, category_group, name, flags) #define TRACE_EVENT_BEGIN_WITH_FLAGS1(category_group, name, flags, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, category_group, name, \ flags, arg1_name, arg1_val) #define TRACE_EVENT_COPY_BEGIN2(category_group, name, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_BEGIN, category_group, name, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \ arg2_name, arg2_val) // Similar to TRACE_EVENT_BEGINx but with a custom |at| timestamp provided. // - |id| is used to match the _BEGIN event with the _END event. // Events are considered to match if their category_group, name and id values // all match. |id| must either be a pointer or an integer value up to 64 bits. // If it's a pointer, the bits will be xored with a hash of the process ID so // that the same pointer on two different processes will not collide. #define TRACE_EVENT_BEGIN_WITH_ID_TID_AND_TIMESTAMP0(category_group, name, id, \ thread_id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_COPY_BEGIN_WITH_ID_TID_AND_TIMESTAMP0( \ category_group, name, id, thread_id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_BEGIN_WITH_ID_TID_AND_TIMESTAMP1( \ category_group, name, id, thread_id, timestamp, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) #define TRACE_EVENT_COPY_BEGIN_WITH_ID_TID_AND_TIMESTAMP2( \ category_group, name, id, thread_id, timestamp, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, arg2_name, \ arg2_val) // Records a single END event for "name" immediately. If the category // is not enabled, then this does nothing. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. #define TRACE_EVENT_END0(category_group, name) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, category_group, name, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_END1(category_group, name, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, category_group, name, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_END2(category_group, name, arg1_name, arg1_val, arg2_name, \ arg2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, category_group, name, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_END_WITH_FLAGS0(category_group, name, flags) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, category_group, name, flags) #define TRACE_EVENT_END_WITH_FLAGS1(category_group, name, flags, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, category_group, name, flags, \ arg1_name, arg1_val) #define TRACE_EVENT_COPY_END2(category_group, name, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_END, category_group, name, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_MARK_WITH_TIMESTAMP0(category_group, name, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_MARK, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_MARK_WITH_TIMESTAMP1(category_group, name, timestamp, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_MARK, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_MARK_WITH_TIMESTAMP2( \ category_group, name, timestamp, arg1_name, arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_MARK, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_MARK(category_group, name) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_MARK, category_group, name, \ TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_MARK1(category_group, name, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_MARK, category_group, name, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) #define TRACE_EVENT_COPY_MARK_WITH_TIMESTAMP(category_group, name, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_MARK, category_group, name, timestamp, \ TRACE_EVENT_FLAG_COPY) // Similar to TRACE_EVENT_ENDx but with a custom |at| timestamp provided. // - |id| is used to match the _BEGIN event with the _END event. // Events are considered to match if their category_group, name and id values // all match. |id| must either be a pointer or an integer value up to 64 bits. // If it's a pointer, the bits will be xored with a hash of the process ID so // that the same pointer on two different processes will not collide. #define TRACE_EVENT_END_WITH_ID_TID_AND_TIMESTAMP0(category_group, name, id, \ thread_id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_COPY_END_WITH_ID_TID_AND_TIMESTAMP0( \ category_group, name, id, thread_id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_END_WITH_ID_TID_AND_TIMESTAMP1( \ category_group, name, id, thread_id, timestamp, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) #define TRACE_EVENT_COPY_END_WITH_ID_TID_AND_TIMESTAMP2( \ category_group, name, id, thread_id, timestamp, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, thread_id, \ timestamp, TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, arg2_name, \ arg2_val) // Records the value of a counter called "name" immediately. Value // must be representable as a 32 bit integer. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. #define TRACE_COUNTER1(category_group, name, value) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, category_group, name, \ TRACE_EVENT_FLAG_NONE, "value", \ static_cast(value)) #define TRACE_COUNTER_WITH_FLAG1(category_group, name, flag, value) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, category_group, name, \ flag, "value", static_cast(value)) #define TRACE_COPY_COUNTER1(category_group, name, value) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, category_group, name, \ TRACE_EVENT_FLAG_COPY, "value", \ static_cast(value)) // Records the values of a multi-parted counter called "name" immediately. // The UI will treat value1 and value2 as parts of a whole, displaying their // values as a stacked-bar chart. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. #define TRACE_COUNTER2(category_group, name, value1_name, value1_val, \ value2_name, value2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, category_group, name, \ TRACE_EVENT_FLAG_NONE, value1_name, \ static_cast(value1_val), value2_name, \ static_cast(value2_val)) #define TRACE_COPY_COUNTER2(category_group, name, value1_name, value1_val, \ value2_name, value2_val) \ INTERNAL_TRACE_EVENT_ADD(TRACE_EVENT_PHASE_COUNTER, category_group, name, \ TRACE_EVENT_FLAG_COPY, value1_name, \ static_cast(value1_val), value2_name, \ static_cast(value2_val)) // Similar to TRACE_COUNTERx, but with a custom |timestamp| provided. #define TRACE_COUNTER_WITH_TIMESTAMP1(category_group, name, timestamp, value) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_COUNTER, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE, "value", static_cast(value)) #define TRACE_COUNTER_WITH_TIMESTAMP2(category_group, name, timestamp, \ value1_name, value1_val, value2_name, \ value2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_COUNTER, category_group, name, timestamp, \ TRACE_EVENT_FLAG_NONE, value1_name, static_cast(value1_val), \ value2_name, static_cast(value2_val)) // Records the value of a counter called "name" immediately. Value // must be representable as a 32 bit integer. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. // - |id| is used to disambiguate counters with the same name. It must either // be a pointer or an integer value up to 64 bits. If it's a pointer, the bits // will be xored with a hash of the process ID so that the same pointer on // two different processes will not collide. #define TRACE_COUNTER_ID1(category_group, name, id, value) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, category_group, \ name, id, TRACE_EVENT_FLAG_NONE, "value", \ static_cast(value)) #define TRACE_COPY_COUNTER_ID1(category_group, name, id, value) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, category_group, \ name, id, TRACE_EVENT_FLAG_COPY, "value", \ static_cast(value)) // Records the values of a multi-parted counter called "name" immediately. // The UI will treat value1 and value2 as parts of a whole, displaying their // values as a stacked-bar chart. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. // - |id| is used to disambiguate counters with the same name. It must either // be a pointer or an integer value up to 64 bits. If it's a pointer, the bits // will be xored with a hash of the process ID so that the same pointer on // two different processes will not collide. #define TRACE_COUNTER_ID2(category_group, name, id, value1_name, value1_val, \ value2_name, value2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, category_group, \ name, id, TRACE_EVENT_FLAG_NONE, \ value1_name, static_cast(value1_val), \ value2_name, static_cast(value2_val)) #define TRACE_COPY_COUNTER_ID2(category_group, name, id, value1_name, \ value1_val, value2_name, value2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_COUNTER, category_group, \ name, id, TRACE_EVENT_FLAG_COPY, \ value1_name, static_cast(value1_val), \ value2_name, static_cast(value2_val)) #define TRACE_EVENT_SAMPLE_WITH_ID1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_SAMPLE, category_group, \ name, id, TRACE_EVENT_FLAG_NONE, arg1_name, \ arg1_val) // -- TRACE_EVENT_ASYNC is DEPRECATED! -- // // TRACE_EVENT_ASYNC_* APIs should be only used by legacy code. New code should // use TRACE_EVENT_NESTABLE_ASYNC_* APIs instead. // // Records a single ASYNC_BEGIN event called "name" immediately, with 0, 1 or 2 // associated arguments. If the category is not enabled, then this // does nothing. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. // - |id| is used to match the ASYNC_BEGIN event with the ASYNC_END event. ASYNC // events are considered to match if their category_group, name and id values // all match. |id| must either be a pointer or an integer value up to 64 bits. // If it's a pointer, the bits will be xored with a hash of the process ID so // that the same pointer on two different processes will not collide. // // An asynchronous operation can consist of multiple phases. The first phase is // defined by the ASYNC_BEGIN calls. Additional phases can be defined using the // ASYNC_STEP_INTO or ASYNC_STEP_PAST macros. The ASYNC_STEP_INTO macro will // annotate the block following the call. The ASYNC_STEP_PAST macro will // annotate the block prior to the call. Note that any particular event must use // only STEP_INTO or STEP_PAST macros; they can not mix and match. When the // operation completes, call ASYNC_END. // // An ASYNC trace typically occurs on a single thread (if not, they will only be // drawn on the thread defined in the ASYNC_BEGIN event), but all events in that // operation must use the same |name| and |id|. Each step can have its own // args. #define TRACE_EVENT_ASYNC_BEGIN0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_ASYNC_BEGIN1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_ASYNC_BEGIN2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_ASYNC_BEGIN0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_ASYNC_BEGIN1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) #define TRACE_EVENT_COPY_ASYNC_BEGIN2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, arg2_name, arg2_val) // Similar to TRACE_EVENT_ASYNC_BEGINx but with a custom |at| timestamp // provided. #define TRACE_EVENT_ASYNC_BEGIN_WITH_TIMESTAMP0(category_group, name, id, \ timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_ASYNC_BEGIN_WITH_TIMESTAMP1( \ category_group, name, id, timestamp, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val) #define TRACE_EVENT_ASYNC_BEGIN_WITH_TIMESTAMP2(category_group, name, id, \ timestamp, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_ASYNC_BEGIN_WITH_TIMESTAMP0(category_group, name, id, \ timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY) // Records a single ASYNC_STEP_INTO event for |step| immediately. If the // category is not enabled, then this does nothing. The |name| and |id| must // match the ASYNC_BEGIN event above. The |step| param identifies this step // within the async event. This should be called at the beginning of the next // phase of an asynchronous operation. The ASYNC_BEGIN event must not have any // ASYNC_STEP_PAST events. #define TRACE_EVENT_ASYNC_STEP_INTO0(category_group, name, id, step) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP_INTO, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, "step", step) #define TRACE_EVENT_ASYNC_STEP_INTO1(category_group, name, id, step, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ASYNC_STEP_INTO, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, "step", step, arg1_name, arg1_val) // Similar to TRACE_EVENT_ASYNC_STEP_INTOx but with a custom |at| timestamp // provided. #define TRACE_EVENT_ASYNC_STEP_INTO_WITH_TIMESTAMP0(category_group, name, id, \ step, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_STEP_INTO, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ "step", step) // Records a single ASYNC_STEP_PAST event for |step| immediately. If the // category is not enabled, then this does nothing. The |name| and |id| must // match the ASYNC_BEGIN event above. The |step| param identifies this step // within the async event. This should be called at the beginning of the next // phase of an asynchronous operation. The ASYNC_BEGIN event must not have any // ASYNC_STEP_INTO events. #define TRACE_EVENT_ASYNC_STEP_PAST0(category_group, name, id, step) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_STEP_PAST, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, "step", step) #define TRACE_EVENT_ASYNC_STEP_PAST1(category_group, name, id, step, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ASYNC_STEP_PAST, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, "step", step, arg1_name, arg1_val) // Records a single ASYNC_END event for "name" immediately. If the category // is not enabled, then this does nothing. #define TRACE_EVENT_ASYNC_END0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_ASYNC_END1(category_group, name, id, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_ASYNC_END2(category_group, name, id, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_ASYNC_END0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_ASYNC_END1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) #define TRACE_EVENT_COPY_ASYNC_END2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, arg2_name, arg2_val) // Similar to TRACE_EVENT_ASYNC_ENDx but with a custom |at| timestamp provided. #define TRACE_EVENT_ASYNC_END_WITH_TIMESTAMP0(category_group, name, id, \ timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_ASYNC_END_WITH_TIMESTAMP1(category_group, name, id, \ timestamp, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val) #define TRACE_EVENT_ASYNC_END_WITH_TIMESTAMP2(category_group, name, id, \ timestamp, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_ASYNC_END_WITH_TIMESTAMP0(category_group, name, id, \ timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY) // NESTABLE_ASYNC_* APIs are used to describe an async operation, which can // be nested within a NESTABLE_ASYNC event and/or have inner NESTABLE_ASYNC // events. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. // - A pair of NESTABLE_ASYNC_BEGIN event and NESTABLE_ASYNC_END event is // considered as a match if their category_group, name and id all match. // - |id| must either be a pointer or an integer value up to 64 bits. // If it's a pointer, the bits will be xored with a hash of the process ID so // that the same pointer on two different processes will not collide. // - |id| is used to match a child NESTABLE_ASYNC event with its parent // NESTABLE_ASYNC event. Therefore, events in the same nested event tree must // be logged using the same id and category_group. // // Unmatched NESTABLE_ASYNC_END event will be parsed as an event that starts // at the first NESTABLE_ASYNC event of that id, and unmatched // NESTABLE_ASYNC_BEGIN event will be parsed as an event that ends at the last // NESTABLE_ASYNC event of that id. Corresponding warning messages for // unmatched events will be shown in the analysis view. // Records a single NESTABLE_ASYNC_BEGIN event called "name" immediately, with // 0, 1 or 2 associated arguments. If the category is not enabled, then this // does nothing. #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN_WITH_FLAGS0(category_group, name, id, \ flags) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ category_group, name, id, flags) // Records a single NESTABLE_ASYNC_END event called "name" immediately, with 0 // or 2 associated arguments. If the category is not enabled, then this does // nothing. #define TRACE_EVENT_NESTABLE_ASYNC_END0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE) // Records a single NESTABLE_ASYNC_END event called "name" immediately, with 1 // associated argument. If the category is not enabled, then this does nothing. #define TRACE_EVENT_NESTABLE_ASYNC_END1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_NESTABLE_ASYNC_END2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_FLAGS0(category_group, name, id, \ flags) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ category_group, name, id, flags) // Records a single NESTABLE_ASYNC_INSTANT event called "name" immediately, // with none, one or two associated argument. If the category is not enabled, // then this does nothing. #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT1(category_group, name, id, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT2( \ category_group, name, id, arg1_name, arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN_WITH_TTS2( \ category_group, name, id, arg1_name, arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_FLAG_ASYNC_TTS | TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \ arg2_name, arg2_val) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_END_WITH_TTS2( \ category_group, name, id, arg1_name, arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_FLAG_ASYNC_TTS | TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, \ arg2_name, arg2_val) // Similar to TRACE_EVENT_NESTABLE_ASYNC_{BEGIN,END}x but with a custom // |timestamp| provided. #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP0(category_group, name, \ id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP1( \ category_group, name, id, timestamp, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val) #define TRACE_EVENT_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP_AND_FLAGS0( \ category_group, name, id, timestamp, flags) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, flags) #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP0(category_group, name, \ id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP1( \ category_group, name, id, timestamp, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val) #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP2( \ category_group, name, id, timestamp, arg1_name, arg1_val, arg2_name, \ arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_NESTABLE_ASYNC_END_WITH_TIMESTAMP_AND_FLAGS0( \ category_group, name, id, timestamp, flags) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, flags) #define TRACE_EVENT_NESTABLE_ASYNC_INSTANT_WITH_TIMESTAMP0( \ category_group, name, id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_END0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_BEGIN_WITH_TIMESTAMP0( \ category_group, name, id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_END_WITH_TIMESTAMP0( \ category_group, name, id, timestamp) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, category_group, name, id, \ TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_NESTABLE_ASYNC_END1(category_group, name, id, \ arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_NESTABLE_ASYNC_END, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) // Records a single FLOW_BEGIN event called "name" immediately, with 0, 1 or 2 // associated arguments. If the category is not enabled, then this // does nothing. // - category and name strings must have application lifetime (statics or // literals). They may not include " chars. // - |id| is used to match the FLOW_BEGIN event with the FLOW_END event. FLOW // events are considered to match if their category_group, name and id values // all match. |id| must either be a pointer or an integer value up to 64 bits. // If it's a pointer, the bits will be xored with a hash of the process ID so // that the same pointer on two different processes will not collide. // FLOW events are different from ASYNC events in how they are drawn by the // tracing UI. A FLOW defines asynchronous data flow, such as posting a task // (FLOW_BEGIN) and later executing that task (FLOW_END). Expect FLOWs to be // drawn as lines or arrows from FLOW_BEGIN scopes to FLOW_END scopes. Similar // to ASYNC, a FLOW can consist of multiple phases. The first phase is defined // by the FLOW_BEGIN calls. Additional phases can be defined using the FLOW_STEP // macros. When the operation completes, call FLOW_END. An async operation can // span threads and processes, but all events in that operation must use the // same |name| and |id|. Each event can have its own args. #define TRACE_EVENT_FLOW_BEGIN0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_FLOW_BEGIN1(category_group, name, id, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val) #define TRACE_EVENT_FLOW_BEGIN2(category_group, name, id, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, arg1_name, arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_FLOW_BEGIN0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_FLOW_BEGIN1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_BEGIN, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val) #define TRACE_EVENT_COPY_FLOW_BEGIN2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_FLOW_BEGIN, category_group, name, id, \ TRACE_EVENT_FLAG_COPY, arg1_name, arg1_val, arg2_name, arg2_val) // Records a single FLOW_STEP event for |step| immediately. If the category // is not enabled, then this does nothing. The |name| and |id| must match the // FLOW_BEGIN event above. The |step| param identifies this step within the // async event. This should be called at the beginning of the next phase of an // asynchronous operation. #define TRACE_EVENT_FLOW_STEP0(category_group, name, id, step) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_STEP, \ category_group, name, id, \ TRACE_EVENT_FLAG_NONE, "step", step) #define TRACE_EVENT_FLOW_STEP1(category_group, name, id, step, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, id, \ TRACE_EVENT_FLAG_NONE, "step", step, arg1_name, arg1_val) #define TRACE_EVENT_COPY_FLOW_STEP0(category_group, name, id, step) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_STEP, \ category_group, name, id, \ TRACE_EVENT_FLAG_COPY, "step", step) #define TRACE_EVENT_COPY_FLOW_STEP1(category_group, name, id, step, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_FLOW_STEP, category_group, name, id, \ TRACE_EVENT_FLAG_COPY, "step", step, arg1_name, arg1_val) // Records a single FLOW_END event for "name" immediately. If the category // is not enabled, then this does nothing. #define TRACE_EVENT_FLOW_END0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_FLOW_END_BIND_TO_ENCLOSING0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, \ TRACE_EVENT_FLAG_BIND_TO_ENCLOSING) #define TRACE_EVENT_FLOW_END1(category_group, name, id, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, TRACE_EVENT_FLAG_NONE, arg1_name, \ arg1_val) #define TRACE_EVENT_FLOW_END2(category_group, name, id, arg1_name, arg1_val, \ arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, TRACE_EVENT_FLAG_NONE, arg1_name, \ arg1_val, arg2_name, arg2_val) #define TRACE_EVENT_COPY_FLOW_END0(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, TRACE_EVENT_FLAG_COPY) #define TRACE_EVENT_COPY_FLOW_END1(category_group, name, id, arg1_name, \ arg1_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, TRACE_EVENT_FLAG_COPY, arg1_name, \ arg1_val) #define TRACE_EVENT_COPY_FLOW_END2(category_group, name, id, arg1_name, \ arg1_val, arg2_name, arg2_val) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID(TRACE_EVENT_PHASE_FLOW_END, category_group, \ name, id, TRACE_EVENT_FLAG_COPY, arg1_name, \ arg1_val, arg2_name, arg2_val) // Special trace event macro to trace task execution with the location where it // was posted from. #define TRACE_TASK_EXECUTION(run_function, task) \ INTERNAL_TRACE_TASK_EXECUTION(run_function, task) #define TRACE_LOG_MESSAGE(file, message, line) \ INTERNAL_TRACE_LOG_MESSAGE(file, message, line) // TRACE_EVENT_METADATA* events are information related to other // injected events, not events in their own right. #define TRACE_EVENT_METADATA1(category_group, name, arg1_name, arg1_val) \ INTERNAL_TRACE_EVENT_METADATA_ADD(category_group, name, arg1_name, arg1_val) // Records a clock sync event. #define TRACE_EVENT_CLOCK_SYNC_RECEIVER(sync_id) \ INTERNAL_TRACE_EVENT_ADD( \ TRACE_EVENT_PHASE_CLOCK_SYNC, "__metadata", "clock_sync", \ TRACE_EVENT_FLAG_NONE, "sync_id", sync_id) #define TRACE_EVENT_CLOCK_SYNC_ISSUER(sync_id, issue_ts, issue_end_ts) \ INTERNAL_TRACE_EVENT_ADD_WITH_TIMESTAMP( \ TRACE_EVENT_PHASE_CLOCK_SYNC, "__metadata", "clock_sync", \ issue_end_ts, TRACE_EVENT_FLAG_NONE, \ "sync_id", sync_id, "issue_ts", issue_ts) // Macros to track the life time and value of arbitrary client objects. // See also TraceTrackableObject. #define TRACE_EVENT_OBJECT_CREATED_WITH_ID(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_CREATE_OBJECT, category_group, name, id, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_OBJECT_SNAPSHOT_WITH_ID(category_group, name, id, \ snapshot) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_SNAPSHOT_OBJECT, category_group, name, \ id, TRACE_EVENT_FLAG_NONE, "snapshot", snapshot) #define TRACE_EVENT_OBJECT_SNAPSHOT_WITH_ID_AND_TIMESTAMP( \ category_group, name, id, timestamp, snapshot) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID_TID_AND_TIMESTAMP( \ TRACE_EVENT_PHASE_SNAPSHOT_OBJECT, category_group, name, \ id, TRACE_EVENT_API_CURRENT_THREAD_ID, timestamp, TRACE_EVENT_FLAG_NONE, \ "snapshot", snapshot) #define TRACE_EVENT_OBJECT_DELETED_WITH_ID(category_group, name, id) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_DELETE_OBJECT, category_group, name, id, \ TRACE_EVENT_FLAG_NONE) // Records entering and leaving trace event contexts. |category_group| and // |name| specify the context category and type. |context| is a // snapshotted context object id. #define TRACE_EVENT_ENTER_CONTEXT(category_group, name, context) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_ENTER_CONTEXT, category_group, name, context, \ TRACE_EVENT_FLAG_NONE) #define TRACE_EVENT_LEAVE_CONTEXT(category_group, name, context) \ INTERNAL_TRACE_EVENT_ADD_WITH_ID( \ TRACE_EVENT_PHASE_LEAVE_CONTEXT, category_group, name, context, \ TRACE_EVENT_FLAG_NONE) // Macro to efficiently determine if a given category group is enabled. #define TRACE_EVENT_CATEGORY_GROUP_ENABLED(category_group, ret) \ do { \ INTERNAL_TRACE_EVENT_GET_CATEGORY_INFO(category_group); \ if (INTERNAL_TRACE_EVENT_CATEGORY_GROUP_ENABLED_FOR_RECORDING_MODE()) { \ *ret = true; \ } else { \ *ret = false; \ } \ } while (0) // Macro to efficiently determine, through polling, if a new trace has begun. #define TRACE_EVENT_IS_NEW_TRACE(ret) \ do { \ static int INTERNAL_TRACE_EVENT_UID(lastRecordingNumber) = 0; \ int num_traces_recorded = TRACE_EVENT_API_GET_NUM_TRACES_RECORDED(); \ if (num_traces_recorded != -1 && \ num_traces_recorded != \ INTERNAL_TRACE_EVENT_UID(lastRecordingNumber)) { \ INTERNAL_TRACE_EVENT_UID(lastRecordingNumber) = num_traces_recorded; \ *ret = true; \ } else { \ *ret = false; \ } \ } while (0) // Macro for getting the real base::TimeTicks::Now() which can be overridden in // headless when VirtualTime is enabled. #define TRACE_TIME_TICKS_NOW() INTERNAL_TRACE_TIME_TICKS_NOW() // Macro for getting the real base::Time::Now() which can be overridden in // headless when VirtualTime is enabled. #define TRACE_TIME_NOW() INTERNAL_TRACE_TIME_NOW() // Notes regarding the following definitions: // New values can be added and propagated to third party libraries, but existing // definitions must never be changed, because third party libraries may use old // definitions. // Phase indicates the nature of an event entry. E.g. part of a begin/end pair. #define TRACE_EVENT_PHASE_BEGIN ('B') #define TRACE_EVENT_PHASE_END ('E') #define TRACE_EVENT_PHASE_COMPLETE ('X') #define TRACE_EVENT_PHASE_INSTANT ('I') #define TRACE_EVENT_PHASE_ASYNC_BEGIN ('S') #define TRACE_EVENT_PHASE_ASYNC_STEP_INTO ('T') #define TRACE_EVENT_PHASE_ASYNC_STEP_PAST ('p') #define TRACE_EVENT_PHASE_ASYNC_END ('F') #define TRACE_EVENT_PHASE_NESTABLE_ASYNC_BEGIN ('b') #define TRACE_EVENT_PHASE_NESTABLE_ASYNC_END ('e') #define TRACE_EVENT_PHASE_NESTABLE_ASYNC_INSTANT ('n') #define TRACE_EVENT_PHASE_FLOW_BEGIN ('s') #define TRACE_EVENT_PHASE_FLOW_STEP ('t') #define TRACE_EVENT_PHASE_FLOW_END ('f') #define TRACE_EVENT_PHASE_METADATA ('M') #define TRACE_EVENT_PHASE_COUNTER ('C') #define TRACE_EVENT_PHASE_SAMPLE ('P') #define TRACE_EVENT_PHASE_CREATE_OBJECT ('N') #define TRACE_EVENT_PHASE_SNAPSHOT_OBJECT ('O') #define TRACE_EVENT_PHASE_DELETE_OBJECT ('D') #define TRACE_EVENT_PHASE_MEMORY_DUMP ('v') #define TRACE_EVENT_PHASE_MARK ('R') #define TRACE_EVENT_PHASE_CLOCK_SYNC ('c') #define TRACE_EVENT_PHASE_ENTER_CONTEXT ('(') #define TRACE_EVENT_PHASE_LEAVE_CONTEXT (')') // Flags for changing the behavior of TRACE_EVENT_API_ADD_TRACE_EVENT. #define TRACE_EVENT_FLAG_NONE (static_cast(0)) #define TRACE_EVENT_FLAG_COPY (static_cast(1 << 0)) #define TRACE_EVENT_FLAG_HAS_ID (static_cast(1 << 1)) #define TRACE_EVENT_FLAG_SCOPE_OFFSET (static_cast(1 << 2)) #define TRACE_EVENT_FLAG_SCOPE_EXTRA (static_cast(1 << 3)) #define TRACE_EVENT_FLAG_EXPLICIT_TIMESTAMP (static_cast(1 << 4)) #define TRACE_EVENT_FLAG_ASYNC_TTS (static_cast(1 << 5)) #define TRACE_EVENT_FLAG_BIND_TO_ENCLOSING (static_cast(1 << 6)) #define TRACE_EVENT_FLAG_FLOW_IN (static_cast(1 << 7)) #define TRACE_EVENT_FLAG_FLOW_OUT (static_cast(1 << 8)) #define TRACE_EVENT_FLAG_HAS_CONTEXT_ID (static_cast(1 << 9)) #define TRACE_EVENT_FLAG_HAS_PROCESS_ID (static_cast(1 << 10)) #define TRACE_EVENT_FLAG_HAS_LOCAL_ID (static_cast(1 << 11)) #define TRACE_EVENT_FLAG_HAS_GLOBAL_ID (static_cast(1 << 12)) // TODO(eseckler): Remove once we have native support for typed proto events in // TRACE_EVENT macros. #define TRACE_EVENT_FLAG_TYPED_PROTO_ARGS (static_cast(1 << 15)) #define TRACE_EVENT_FLAG_JAVA_STRING_LITERALS \ (static_cast(1 << 16)) #define TRACE_EVENT_FLAG_SCOPE_MASK \ (static_cast(TRACE_EVENT_FLAG_SCOPE_OFFSET | \ TRACE_EVENT_FLAG_SCOPE_EXTRA)) // Type values for identifying types in the TraceValue union. #define TRACE_VALUE_TYPE_BOOL (static_cast(1)) #define TRACE_VALUE_TYPE_UINT (static_cast(2)) #define TRACE_VALUE_TYPE_INT (static_cast(3)) #define TRACE_VALUE_TYPE_DOUBLE (static_cast(4)) #define TRACE_VALUE_TYPE_POINTER (static_cast(5)) #define TRACE_VALUE_TYPE_STRING (static_cast(6)) #define TRACE_VALUE_TYPE_COPY_STRING (static_cast(7)) #define TRACE_VALUE_TYPE_CONVERTABLE (static_cast(8)) // Enum reflecting the scope of an INSTANT event. Must fit within // TRACE_EVENT_FLAG_SCOPE_MASK. #define TRACE_EVENT_SCOPE_GLOBAL (static_cast(0 << 2)) #define TRACE_EVENT_SCOPE_PROCESS (static_cast(1 << 2)) #define TRACE_EVENT_SCOPE_THREAD (static_cast(2 << 2)) #define TRACE_EVENT_SCOPE_NAME_GLOBAL ('g') #define TRACE_EVENT_SCOPE_NAME_PROCESS ('p') #define TRACE_EVENT_SCOPE_NAME_THREAD ('t') #endif // BASE_TRACE_EVENT_COMMON_TRACE_EVENT_COMMON_H_